GLASS DISPENSER COOL GRY 40CUP

Plated plastic. Flow control and shut-off.

ADAPTER COMPXMPT 5/16X3/8 #68-56

The end outlet tee and tailpiece is for installation in a double bowl sink drain system where the outlet drain is aligned directly under one of the sinks

End outlet tees master end outlet with baffle plastic slip joint or direct connect white

Plumb Pak Master End Outlet and Tailpiece, Nominal Size: 1-1/2 in, Slip-Joint Connection, Plastic, White, Suitable for: Double Bowl Sink Drain System, Includes: (3) Wing Nuts, Washers

Plastic face with standard aluminum tailpiece.

22 gauge.
"The S trap's dimensions are 1 1/4"" inlet x 1 1/4"" outlet and drains through the floor in the bathroom. The S Trap is constructed of 22 gauge chrome plated brass and includes all necessary flange, nuts and washers"

2 per card.

COMPRESSION NUT 1/4 LF BG3

1-1/2 by 11 to 20 inch slip joint with 3/4 inches br. Tailpiece. With telescoping tee. 1- 1/2 inches x 11 inch to 20 inches slip joint with 3/4 inches BR. tailpiece with telescoping tee.

2 gpm flow rate.
Swivel action shower head with shut-off-energy saver

WELL TANK VERT PRESSURE 32 GAL

Easy installation
Maximum 100 psi pressure rating for residential use
Heavy-duty diaphragm is designed for extended life
Locking ring provides an airtight diaphragm seal for years of dependable service
High-grade polypropylene liner is non-metallic for clean, fresh, great tasting drinking water
Weather-resistant paint system withstands damp environments without corroding
Durable steel base provides strong support

Well tanks pre-charged vertical tank size- equiv\ 32/82 gallons Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water.

Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature is 200 deg F. Factory pre-charged to 38 psi. Made in the USA. 5 year limited warranty. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperatu re: 200?F. Factory pre-charged to 38ps

Plumb Pak Sink Tailpiece, 1-1/2 in, Material Specifications: PVC, White, 6 in L Dimensions

For lavatory.P-traps plastic size 1 inch -1/4 finish=chrome For lavatory.

UPC individually bagged.
Anderson Metals Tube Elbow, Nominal Size: 1/2 x 3/4 in, Angle: 90 deg

UNION COMPRESSION 5/8X1/2